We always look for easy ways to make cleaning day go more quickly and efficiently so that we can spend more time with family and friends and less time scrubbing. Unfortunately, bathroom floors are one of the dirtiest places in the house. It is very much time consuming to clean the bathroom floor and make them look a bit better in some way. there are minor changes you can make to your cleaning routine to expedite the process without sacrificing quality. Luckily, you can now utilise multiple tools to complete the task. One of them is using electric cleaning brush.

We have all the tips and tricks you need to clean bathroom floors faster, smarter, and better. But you need to follow some steps. They are explained below.

Step 1:

You cannot use a heavy vacuum cleaner in your bathroom space. It will not be practical to clean the whole area. Therefore, it is recommended to use a small broom to clean the bathroom floor and collect the dust and dirt at a single point on the floor. Collect it and throw it in the wastebasket. It is also essential to clean the base of the toilet before applying anything to it further. Try to clean as much as you can. It is also recommended to clean the spaces where the dust tends to accumulate in general. In addition, you can use a wet paper towel to pick up the leftover dust particles.

Step 2:

While cleaning the bathroom floors, keep your cleaning bucket tucked away. Make your bathroom sink into a makeshift bucket instead of hauling it upstairs with your mop. Simply close the drain and fill the sink with a gallon of warm water. Include a cleaning solution. Wring out excess water with a cloth after immersing it in the mixture. Between passes, rinse the rag to avoid messing the floor again.

Step 3:

You’ll have to make your grout cleaner unless you’re using a commercial grout cleaner. Combine baking soda and water to clean mildly dirty grout. If your bathroom grout is stained or discoloured, replace the water with Vinegar. On the other hand, Vinegar can be harmful to some tile materials, so avoid using it if you have floors including marble, slate, granite, and tiles. If you’re cleaning coarse or fragile tiles, combine parts of baking soda and hydrogen peroxide accordingly. Next, scrub the surface with an electric cleaning brush. It will take less time and power to clean the floor. You can see the results immediately and get a clean and shining floor within no time.

Step 4:

The final step of bathroom floor cleaning is Towel-drying the floor. It will give a gleaming effect to the floor. But why make it any more difficult than it has to be? Instead of squatting on your hands and knees to dry them, spread a large towel on the ground. Find your balance and place one foot on the towel, section by section, to move it around the bathroom floor. Large bathrooms may necessitate the use of two towels, depending on how wet they become. Start at the far end of your bathroom so you can finish drying by the door. This way, you won’t have to walk across your freshly cleaned floors to leave.

It is very important to keep your bathroom clean and other parts of the house. And you can do so by using the right cleaning accessories. If you are still in any doubt, let us know, and we can help you make your home cleaner than ever.